 | EasyProbe: software de sonda para centros de mecanizadoPor el momento, esta página no está disponible en español. Puede obtener una traducción automática mediante la opción de traducción de Google.
No podemos responsabilizarnos de este servicio puesto que podemos verificar los resultados de la traducción.
About EasyProbe softwareEasyProbe software cycles are designed for use by machine tool operators for simple job set-up and measuring tasks on machining centres. The software can be easily configured, using a supplied install utility, to suit the machine tool configuration. Probing can either be through use of the machine tool handwheel / jog function with cycles run via manual data input, or through cycles written into a part program and run automatically. Features and benefits
EasyProbe specification
Probing cycles featured in the EasyProbe softwareEasyProbe offers simple programming for basic workpiece set-up and part inspection tasks. Angle measure
The angle can then be used to update a 4th axis or enable G68 co-ordinate rotation.
Bore / boss cycle
The error of size and centre position can be stored or used to update the relevant work offset registers. This cycle is also used to calibrate the XY axis offsets of a probe and the radii of a probe stylus ball.
EasyProbe sample program
Example program
Ordering information
Data sheetPasos siguientesPóngase en contacto con nosotros si desea más información o consultar precios, o si prefiere hablar directamente con su oficina local de Renishaw. |
EasyProbe software for machining centres provides simple and fast job set-up and measuring routines for operators, requiring minimal programming skill.
The angle of a surface can be found by running two single surface measure routines, the second with an 'A' input to calculate the angle between the two points.
This cycle is used to measure the feature width and centre position using four points parallel with the X and Y axes.
Sample program and description of all EasyProbe programming terms.